Jax Auto Repair

Servicing Brea and the surrounding area since 1985

Jax Auto Repair - Servicing Brea and the surrounding area since 1985

Wheel Balancing

So you love your job, and your family life is great. Congratulations! You have achieved balance. But can you say the same for your wheels? You can tell if your tires are out of balance by vibrations at higher speeds on California interstates. If one of the front tires is out, you feel the vibration in the steering wheel. If it’s a back tire, you’ll feel the vibration in your seat.

Tires and wheels are pretty heavy. When a tire is mounted on a wheel at Jax Auto Repair, it is usually not perfectly balanced. So the tire technician will spin the tire on a machine to determine where it’s too heavy. He will then place weights on the wheels in strategic locations to balance it out. When a tire is out of balance, it actually bounces down the road instead of rolling smoothly. Since the average size tire rotates at about 850 revolutions per minute at 60 MPH, it is actually slamming into the pavement 14 times a second. That’s where you get your vibration.

Most Brea motorists are surprised at how smoothly their car rides after balancing all four wheels.

Most high-quality tires hold their balance pretty well. They just get out of balance gradually with normal wear and tear. If you suddenly feel a vibration, it is probably because you lost a wheel balancing weight along the way. Definitely get a balance if you feel a vibration, change your rims or have a flat repaired. Putting off a needed balance job leads to excessive tire wear, wear to your shocks, struts, steering and suspension parts. Wheel balancing not only improves your ride and handling, but also can save you some big repair bills and possibly an accident. Additionally, you will get better gas mileage.

Some La Habra drivers have their tires balanced at every rotation. Others do it every other time. Check your owners’ manual for your requirements, or ask your friendly Jax Auto Repair tech. Doing this will put you on the path to mechanical wheel balance

.

Brea Tire Repair

Most La Habra drivers have experienced a flat tire. You know it’s inconvenient and a pain. Our tires are important. Keeping them in good working order isn’t just a big safety issue – it also has a financial impact. With high gas prices, we’ve all heard about the importance of keeping proper tire pressure to get the best possible gas mileage. In addition, proper inflation promotes even tread wear so your tires last longer.

There’s another danger to under-inflated tires. Low tire pressure puts added stress on the structure of the tire itself, causing it to break down prematurely. Also, under-inflated tires generate more heat which also reduces tire life. So get those slow leaks fixed quickly – don’t just keep airing them up every few days. You want to avoid serious tire damage.

Tires can also be damaged by road hazards in and around Brea. Punctures, cuts and unfortunate encounters with curbs or potholes can also cause damage that could lead to tire failure. Sometimes, it’s something that an automotive analysis would reveal. Try to remember to check your tires when you’re pumping fuel. Look for slashes, missing chunks, nails or screws in the tread or just uneven wear. Of course check the air pressure too.

Now tire damage can be on the inside where you can’t see it until it’s removed from the wheel. Such damage could come from a severe impact, driving on a flat or even just low pressure. Some punctures can cause internal damage that is too extreme to be repaired. You may see our Jax Auto Repair tire professionals take the time to remove your flat from the rim and inspect the inside before repairing it, which means we’re just following best practices.

Of course, some tires just can’t be repaired. A puncture may be too large to plug. Also, the puncture could be in a location that’s not safe to repair like in the sidewall or outer portion of the tread. So called run-flat tires should not be repaired because their design is such that internal damage can’t be detected by a visual inspection.

Brea auto owners should only hire qualified tire professionals to perform repairs – we have a whole team of them at Jax Auto Repair. La Habra folks can buy self repair kits, but we advise you to save those for emergencies, like when you’re off-roading and need a quick fix so you can hobble back to civilization and get professional help. If you need to use a repair-in-a-can product, remember it’s a temporary measure only and your tire needs to be properly repaired as soon as possible.

Here are some other considerations: A DIY flat repair may void your tire manufacturer’s warranty – just something to keep in mind. Also, if you repair a speed rated tire, you should not use it in any motorsports or operate it above legal speed limits. Your friendly Jax Auto Repair tire specialist will repair your tire whenever it’s safe to do so and he’ll advise you when it’s better to replace it. So watch those curbs and keep the air – on the inside.

Jax Auto Repair
331 South Brea Boulevard, Brea, California 92821
(714) 529-2886

When Are Your Tires Worn Out?

Hey La Habra, are your tires worn out? What is the standard for our California streets? How can you tell on your sedan?

While there may be legal requirements for the La Habra area, there are safety concerns that go beyond meeting minimum replacement mandates.

2/32 is the depth of the tire tread wear indicator bars that US law has required to be molded across all tires since August 1, 1968. When tires are worn so that this bar is visible, there’s just 2/32 of an inch – 1.6 millimeters – of tread left. It’s that level of wear that’s been called into question recently.

We’re referring to the Consumer Reports call to consider replacing tires when tread reaches 4/32 of an inch, or 3.2 millimeters. And the recommendation is backed by some very compelling studies.

The issue is braking on wet surfaces in and around La Habra. Most of us think of our brakes doing most of the work, but if you don’t have enough tread on your tires, the brakes can’t do their job. When it’s wet or snowy, the tread of the tire is even more critical to stopping power.

Picture this: you’re driving over a water covered stretch of road near La Habra, California. Your tires must be in contact with the road in order to stop. That means that the tire has to move the water away from the tire so that the tire is actually contacting the road and not floating on a thin film of water.

Floating on the surface of water is called hydroplaning. So if there’s not enough tread depth on a tire, it can’t move the water out of the way and you start to hydroplane.

In the study a section of a test track was flooded with a thin layer of water. If you laid a dime on the track, the water would be deep enough to surround the coin, but not enough to cover it.

A car and a full-sized pick-up were brought up to 70 miles per hour, or 112 kilometers an hour and then made a hard stop in the wet test area. Stopping distance and time were measured for three different tire depths:

  • New tire tread depth
  • 4/32 of an inch
  • 2/32 of an inch

So what happened with the 2/32 tires on the car? Get this – when the car had traveled the distance required to stop with new tires, it was still going 55 miles an hour. Stopping distance was nearly doubled to 379 feet and it took 5.9 seconds.

Wow! That means if you barely have room to stop with new tires, you would hit the car in front of you at 55 miles an hour with the worn tires.

Now, with the partially worn tires – at 4/32 of an inch – the car was still going at 45 miles an hour at the point where new tires brought the car to a halt. It took nearly 100 feet more room to stop and 1.2 seconds longer. That’s a big improvement. We can see why Consumer Reports and others are calling for a new standard.

Of course, stopping distances were greater for the heavier pick-up truck.

How do you know when your tires are at 4/32 of an inch? Easy; just insert a quarter into the tread. Put it in upside down. If the tread doesn’t cover George Washington’s hairline, it’s time to replace your tires. With a Canadian quarter, the tread should cover the numbers in the year stamp.

You may remember doing that with pennies. A penny gives you 2/32 to Abraham Lincoln’s head. The quarter is the new recommendation – 4/32.

How do people feel about replacing their tires earlier? Well, tires are a big ticket item and most people want to get the most wear out of them that they can. But do you want that much more risk just to run your tires until they are legally worn out?

For us, and we would guess for many, the answer is “no”.

Jax Auto Repair
331 South Brea Boulevard
Brea, California 92821
(714) 529-2886

Maintaining Your Older Car In Brea California

The government mandates a lot of equipment on cars in Brea California: emission devices and control computers, safety equipment like airbags and crash worthiness requirements. All of this is great for the Brea California motoring public, but it does add quite a bit to the price of a new car.

Because new cars are more expensive, people in the La Habra area are driving their old cars longer. The average car is now over nine years old. Two thirds of vehicles on the road in La Habra have more than 75,000 miles. As cars age, their performance drops, they have difficulty idling for long periods and are more sensitive to weather extremes. Fortunately today’s cars are up to the challenge – but they need a little help to keep on goin’.

Give Jax Auto Repair a call to schedule your next maintenance.
331 South Brea Boulevard
Brea, California 92821
(714) 529-2886

Some owner’s manuals don’t specify service requirements at higher mileage. That doesn’t mean it doesn’t have to be done. In fact, it’s more important than ever to stay on top of routine maintenance for cars with more than 75,000 miles.

First, just extend regular service intervals out: for instance a service that’s recommended every 15,000 miles should be performed at 15,000, 30,000, 45,000 and 60,000 miles, and so on. Because of the additional stress older engines experience, the severe service maintenance schedule is more appropriate than the regular schedule – ask your service advisor. Watch for leaks – seals and gaskets dry out over time and don’t hold the fluids as well as they used to.

It’s also time to make sure you have a good Brea California technician. There are some services and replacements that are scheduled after you put on some clicks, like timing belts, valve train adjustments, suspension, anti-lock brake service, air bags, etc. And unexpected repairs down the road are just par for the course. Check for unusual sounds, smells or the way your car feels. These could be hints that trouble’s brewing. Better to catch it early before it turns into a costly repair.

And a regular wash and wax will help maintain your car’s appearance. One of the things you can do to really help your high mileage vehicle is to begin using high mileage formulation fluids. There are special engine oils, coolants, and transmission and power steering fluids that are formulated for cars that have a few clicks on the old odometer.

High mileage oil is designed to condition seals and gaskets, reduce wear and avoid premature burn off. Older engines are dirtier inside – and dirty engines contaminate their oil faster. High mileage oil has special additives that clean the engine, removing sludge deposits over time. The result is less stress on the engine, better fuel economy and excellent wear protection.

Studies have even shown that using high mileage fluids early will actually prevent some of the problems of high mileage vehicles. So once you hit around 50,000 miles, consider stepping up to high mileage formulations. High mileage fluids cost a bit more than standard fluids because of the additional additives, but they can be worth their weight in gold in terms of preventing repair costs down the road. It does cost more to properly maintain a higher mileage vehicle – but it’s way cheaper than a new car payment!