Jax Auto Repair

Servicing Brea and the surrounding area since 1985

Jax Auto Repair - Servicing Brea and the surrounding area since 1985

Direct Fuel Injection Update From Jax Auto Repair

For those of you in Brea California who pay attention to these things, you may have been hearing about the new direct injection engines and want to learn more about them. Some deliver the power of a V8 with the economy of a V6.

For example, in one family of engines the conventional V6 makes about 250 horsepower. The direct injection version of the same engine makes over 300 horsepower and gets essentially the same gas mileage. The turbocharged version makes over 350 horsepower.

So what are the differences from a conventional engine?

The core difference is in the fuel injection system. The system most vehicles use now is called a port injection system. The fuel injector squirts fuel into a port just outside the cylinder where it’s then drawn into the engine with the air.

With a direct injection system, the injector squirts the fuel directly into the cylinder. The gain in power and economy come because fuel injected directly into the cylinder during the combustion cycle is burned much more efficiently.

First, the fuel is squirted in at hundreds of times more pressure, so it’s atomized much better and burns cleaner and stronger. The other big advance is in electronics. Faster engine management computers can control the additional precision required to manage direct fuel injection.

Fuel injectors are precision instruments. They have to deliver a precise amount of fuel at exactly the right time. The design of the engine also dictates a particular spray pattern for the fuel. If a fuel injector is dirty or gummed up, it can’t do its job as well. That means less power and worse fuel economy for your sedan and can lead to damaged fuel injectors.

Replacing fuel injectors isn’t cheap. Direct injection injectors are even more expensive because of the extremely high-pressure they use. Same thing for diesel fuel injectors; we’re talking mortgage payment-range to replace a set of diesel injectors.

A professional fuel system cleaning from Jax Auto Repair gets out the gum and varnish in the whole system, including the fuel injectors. Keep those injectors clean and they’ll last a long, long time.

Stop It! You Need Good Brakes

Good brakes are obviously very important. If you’ve ever had your brakes go out while you’re driving around the La Habra area, you’ll know how terrifying it can be. Today we’ll focus on how to tell when you have a brake problem, and how to make good repair choices.

Often, the first indication that something’s wrong with the brakes is an unusual sound. It could be a squeal, chatter or grinding sound.

Some brake pads have a little piece of metal embedded in them that will make a squeal or chirping sound when the brake pads have been worn down to the point that they need to be replaced. It’s an early warning indicator.

When you hear that sound, schedule an appointment at Jax Auto Repair soon.

Now a chattering sound is more urgent. That usually indicates that something is loose. It could be a brake pad or even the brake calipers. If one of those parts falls off, you could have some serious trouble stopping the vehicle. It would be a good idea to park it until you can get into the shop.

A grinding noise usually means that the brake pad is completely worn away and the metal parts of the brake are rubbing directly on the metal brake rotor. That means the rotor is being damaged and will need some work. More on that later.

Another warning sign is that your brake pedal may feel soft and spongy – or it may even feel very hard to push in. Both could mean trouble. And of course, you may get a dashboard brake warning light.

Now when it comes time to replace your brake pads, you have a choice to make. You can get the same pads that came standard on your vehicle. You can expect the same performance and durability as with the pads that came on the car from the factory.

Now you can also get a budget brake pad. Sometimes drivers insist on lower cost pads. That’s OK if the budget demands it, but you need to be aware of the trade offs. Lower grade pads are usually noisier, so you’ll have to live with more noise when you apply the brakes. They also tend to generate a lot more brake dust, you know, that black dust that accumulates on your wheels. And they probably won’t last as long either. In our opinion, that’s a lot of compromise for just a few dollars in savings.

You can also choose to buy premium brakes pads. These perform at higher specifications than the factory pads. You can expect quieter operation, less brake dust and better stopping power.

Now, getting back to the rotors. The rotors are the discs that the brake pads clamp down on to stop the vehicle. If you’ve been driving with completely worn brake pads, you’ve scratched grooves into the rotors. If the grooves aren’t too deep, the rotor can be resurfaced. A thin layer of metal is cut off the surface of the rotor to make it smooth again.

Now, if the grooves are too deep or if the rotor has already be resurfaced before, there may not be enough material to resurface and still have a rotor that’s thick enough to safely stop the vehicle. In that case, the rotor will have to be replaced.

Something that’s often overlooked is the brake fluid. Your manufacturer has a recommended schedule for evacuating the old brake fluid, cleaning the system and refilling it with fresh brake fluid. This is really important to brake performance.

So here’s the bottom line: if you suspect, inspect. If you notice any of these warning signs, have your brakes inspected. Your advisor can help you make the repair decision that’s right for you.